Linux命令行获取HP iLo配置信息

安装命令行工具

#yum install hponcfg

测试一下

#hponcfg -g

输出如下

HP Lights-Out Online Configuration utility
Version 4.1.0 Date 1/3/2013 (c) Hewlett-Packard Company, 2013
Firmware Revision = 1.81 Device type = iLO 2 Driver name = hpilo
Host Information:
                        Server Name: DL380G5PXXXX
                        Server Number: 000000000

编辑一个xml文件

# cat getinfo.xml
<RIBCL VERSION="2.0">
   <LOGIN USER_LOGIN='yourusername' PASSWORD='yourpassword'>
      <RIB_INFO MODE="read">
         <GET_NETWORK_SETTINGS/>
      </RIB_INFO>
   </LOGIN>
</RIBCL>

执行命令

#hponcfg -f getinfo.xml

输出如下

HP Lights-Out Online Configuration utility
Version 4.1.0 Date 1/3/2013 (c) Hewlett-Packard Company, 2013
Firmware Revision = 1.81 Device type = iLO 2 Driver name = hpilo
<GET_NETWORK_SETTINGS>
    <ENABLE_NIC VALUE="Y"/>
    <SHARED_NETWORK_PORT VALUE="N"/>
    <VLAN ENABLED="N"/>
    <VLAN_ID VALUE="0"/>
    <SPEED_AUTOSELECT VALUE="Y"/>
    <NIC_SPEED VALUE="10"/>
    <FULL_DUPLEX VALUE="N"/>
    <DHCP_ENABLE VALUE="N"/>
    <DHCP_GATEWAY VALUE="Y"/>
    <DHCP_DNS_SERVER VALUE="Y"/>
    <DHCP_WINS_SERVER VALUE="Y"/>
    <DHCP_STATIC_ROUTE VALUE="Y"/>
    <DHCP_DOMAIN_NAME VALUE="Y"/>
    <REG_WINS_SERVER VALUE="Y"/>
    <REG_DDNS_SERVER VALUE="Y"/>
    <PING_GATEWAY VALUE="N"/>
    <MAC_ADDRESS VALUE="00:1e:0b:d9:a8:7a"/>
    <IP_ADDRESS VALUE="10.15.xxx.xxx"/>
    <SUBNET_MASK VALUE="255.255.254.0"/>
    <GATEWAY_IP_ADDRESS VALUE="10.15.xxx.1"/>
    <DNS_NAME VALUE="ILOCNGxxxxxxx"/>
    <DOMAIN_NAME VALUE=""/>
    <PRIM_DNS_SERVER VALUE="0.0.0.0"/>
    <SEC_DNS_SERVER VALUE="0.0.0.0"/>
    <TER_DNS_SERVER VALUE="0.0.0.0"/>
    <PRIM_WINS_SERVER VALUE="0.0.0.0"/>
    <SEC_WINS_SERVER VALUE="0.0.0.0"/>
    <STATIC_ROUTE_1 DEST="0.0.0.0"
                    GATEWAY="0.0.0.0"/>
    <STATIC_ROUTE_2 DEST="0.0.0.0"
                    GATEWAY="0.0.0.0"/>
    <STATIC_ROUTE_3 DEST="0.0.0.0"
                    GATEWAY="0.0.0.0"/>
</GET_NETWORK_SETTINGS>